Z5 piston seal

Z5 is the two U-shaped seal and the guide surface as one of the two-way pneumatic piston seal.

When used in pneumatic equipment, the design has the following advantages:

• No metal contact between the piston and cylinder to prevent friction, especially between light metal and plastic cylinders.

• By optimizing the geometry of the sealing lip to keep lubricant film, and a suitable choice of materials, it is running smoothly.

• for oil-free dry air when, after initial lubricating provide a longer service life.

• same groove, can also use a single-acting cylinder seal Z7.

• Easy to assemble in one-piece piston.

Due to the special geometry, should be avoided with Lateral load condition in.

Applications

Working Pressure: 16bar

Operating temperature -30 ℃ to + 80 ℃

Surface speed: 1m / s

Medium: lubricated air and after initial lubricating oil-free dry air.

Material

Standard materials:

        N3578, nitrile rubber, Shore hardness of about 75 A

Temperature materials:

        N8602, nitrile rubber, Shore hardness of about 70 A

High Temperature Materials:

         V8550, fluorine rubber, a hardness of about Shore 80 A

Installation

Z5 series pneumatic piston seals can be easily mounted on the integral piston by stretching.

Make sure all edges are deburring, to avoid damaging the seal.

For special requirements (temperature, speed, used for water, HFA solution, HFB fluid, etc. medium), please contact our service department in order to recommend to you the appropriate materials and structures.

The above data are in standard materials and standard media measured, the specific temperature range required depending on the application conditions.

  Order No. D * d * H

Z51610N3578      16*10*10.5

Z51812N3578      18*12*10.5

Z52014N3578      20*14*10.5

Z52518N3578      25*18*12

Z52822N3578      28*22*10.5

Z53023N3578      30*23*12

Z53225N3578      32*25*12

Z53528N3578      35*28*12

Z54033N3578      40*33*12

Z54538N3578      45*38*12

Z55043N3578      50*43*12

Z55446N3578      54*46*13

Z56353N3578      63*53*17

Z56356N3578      63*56*12

Z57007N3578      70*62*13

Z57666N3578      76*66*18

Z58070N3578      80*70*18

Z58067N3578      80*72*13

Z5A088N3578      100*88*21

Z5A089N3578      100*90*16

Z5C511N3578      125*113*15

Z5C513N3578      125*113*21

Z5D017N3578      130*120*17

Z5E028N3578      140*128*21

Z5F014N3578      150*140*17

Z5G045N3578      160*145*26

Z5L085N3578      200*185*26