Germany MERKEL pneumatic piston ring seal -AIRZET PK

1. Features
      Able to work under pressure, the pressure side with a two-way Clamp ring groove. Compact piston can be used to make short axial dimension (eg short-stroke cylinders). Rounded sealing surface and a soft center portion provides low friction and maintain an effective lubricant film a good seal.

2. Operating conditions
    Media: treated and dried, compressed air without lubricant (grease-coated after assembly).
    Working pressure: ≤1.2MPa (12bar)
    Temperature: -20 ℃ ~ + 100 ℃
    Line Speed: ≤1m / s

3. Material
    Nitrile rubber (NBR)
    Hardness: 80 Shore A
    Grade: 80NBR 245001 (MB219)

4. trenches and machine processing standards
    Cylinder: Rmax≤4μm, Rp / Rz <0.5
    tp (25% Rmax) = 50% ~ 75%
    Trench floor: R max≤10μm, Rp / Rz <0.5

5. Install
    Careful installation is to ensure a good seal function prerequisites. Clamp ring AIRZET PK removing burrs from (edge rounding) of the piston into the cavity edge withhold groove.