Parker A6-type dust ring

    A6 wiper function is to prevent dust, dirt, sand, metal debris from entering the radial gap in the rod guide sleeve. Through a special design to protect the guide element to extend the life of the seal. A6 provides accurate closed end protection. When installed without the snap ring and nut, and without tight tolerances. Suitable for pole through, A6 even allow the eccentric 1.5 mm can still effectively remove dust.

1. Application:

   Operating temperature:

     -35 ° C to + 100 ° C (mineral oil); - + 5 ° C to + 60 ° C (HFA / HFB)

   Surface speed: ≤2m / s

  Underground equipment for the mining industry, mobile hydraulic spool valve, multi-stage fuel tank and the like.

2. Install:

  It can be loaded by hand groove.

  Material: N3764 Shore A hardness is about 92 degrees special rubber.