DE type is a single U-shaped seal and single-acting metal skeleton vulcanization bonding integral pneumatic piston. It has three functions: Sealing, guiding and cushioning.
Advantage
• Simple fixing without additional sealing requirements in the piston rod.
• Since the ventilation channel structure, it can quickly respond to (full pressure load).
• Due to the geometry of the sealing lip lubricant film can be maintained, so friction is small, smooth operation.
• Can be used for oil-lubricated air as well as by the dry air after initial lubricating oil-free air.
Applications
DE integral piston for the end of a buffer of single-acting cylinders, in the case of long stroke and bending, can not withstand excessive load.
Working Pressure: 12bar
Operating temperature: -30to + 80 ℃
Surface speed: 1m / s
Media: oil lubricated and oil-free air through the air initially lubricated.
Material
Standard material is a synthetic rubber (NBR group), Shore A71, and vulcanization bonding with metal skeleton.
Installation
DE use pneumatic piston integral locking nut secured to the piston rod so as not to loose, dry and free of oil for air, the piston and cylinder should adopt suitable long-life lubricant pre-lubricated.
For special requirements (temperature, speed, used for water, HFA solution, HFB fluid, etc. medium), please contact our service department in order to recommend appropriate materials and structures.
The above data are in standard materials and standard media measured. Require specific temperature range depending on the application conditions.
Order No. D * d * H1 * H2 / h
DE0602Z5108* 6*2*2.8*2.3/1.45
DE0803Z5117 8*3*3.7*3/1.8
DE1003Z5108* 10*3*3.7*3/1.8
DE1203Z5108 12*4.5*4.4*3.4/2.3
DE1603Z5108 16*4.5*4.4*3.4/2.3
DE2005Z5108 20*6*5.5*4.4/2.8
DE2506Z5108 25*7*6.4*5.4/3.5
DE3208Z5117 32*8*7.5*6/3.5
DE4008Z5117 40*8*8.5*7/4.5
DE5010Z5117 50*10*10*8/4.5
DE6312Z5117 63*12*10*8/4.5
DE8016Z5117 80*16*11.4*9.4/5.5
DEA020Z5117 100*20*12.9*10.9/6.5
|
