Parker ON type rod seal combination (double-acting)
ON-type piston rod seal is the seal ring and O-ring consists of PTFE rod. Hydraulic cylinder and piston rod seal.
ON seals is particularly applicable to the control cylinder, servo systems, machine tools, construction machinery and fast response cylinders bidirectional piston cylinder. It is used in conjunction with the dust seal lips can achieve optimum sealing performance.
This seal has the following advantages:
● small dimensions.
● minimum friction starting and movement, even at low speeds but also to ensure smooth movement, no creeping phenomenon.
● wear resistance.
● anti-extrusion.
● high temperatures.
● Since the seal ring has a high resistance to chemical corrosion characteristics of medium, and choose a different O-ring materials, ON seals it can be applied to almost all media.
● can provide up to a diameter of 2500mm products.
Note: For special applications, such as heavy load or light load, you can choose a non-standard section. In this case, select another section instead of the standard cross-section, for example: the above example, with a "C" or "E" section instead of the "D" section.
1. Standard Materials:
Sealing ring: Polon ® 052, modified PTFE + 40% copper
O-ring: N0674, nitrile rubber Shore hardness of about 70
If the special requirements (pressure, temperature, speed, etc.), please consult our service department in order to recommend the right materials and structures.
2. Application:
Working pressure: ≤400bar *
Working temperature: -30 to + 100 ℃ **
Surface speed: ≤4m / s
* Under reduced extrusion gap (H7 / f7) of the case, the pressure can be increased to 600 bar.
** Standard temperature deviations, please consult the appropriate Parker O-rings.
Please seal this together with the use of the guide.
|