Model: B2FUDSL
Material: Simrit 72 NBR 902

1. Features
OD: metal skeleton
Metal insert
Spring-loaded sealing lip
Deputy dust lip
Molded sealing edge finishing, deburring machinery.
2. Materials

Simrit 72 NBR 902:
Hardness of 72 Shore A NBR
Metal and metal cylindrical plug: DIN1624 low-carbon steel
Spring: DIN17223 spring steel
3. Operating conditions

Media: mineral oils, synthetic oils, grease
T: -40 ℃ ~ + 100 ℃, short-term up to + 120 ℃
v: See the sample diagram on page 4
p: to 0.02MPa (0.2bar) maximum permissible value of other operating conditions

4. Advantages

Widely used in various industrial fields
Metal cylindrical bore the seal ring mounted in the cavity of the particularly strong and precise, but limited role in sealing the outer medium to low viscosity and gaseous media.
Vice-lip prevents dust mild to moderate dust and dirt intrusion.
The outer coating is recommended when you quit sealant installation.
5. cavity and machining standards

Axis: Tolerance: ISO h 11
    Concentricity: IT 8
    Roughness R a = 0,2 - 0,8 μm
        R z = 1,0 - 5,0 μm
        R max = <6,3 μm
    Hardness: 45-60 HRC
    Finish: no to the state, preferably with a cross feed grinding
Cavity: Tolerance: ISO H8
    Roughness: R z = 6,3 - 16 μm

6. Install
Press DIN3760 regulations, careful installation is to ensure a good seal function prerequisite

¢ d1 shaft diameter size range
B2FUD: 15mm ~ 190mm
B2FUDSL: 45mm ~ 125mm